TARGET® Cement/Silica Fume Slurry Grout (99915627) consists of accurately weighed and blended Portland cement, silica fume and graded sand combined in the 46/4/50 parts by weight proportions specified by many authorities for improving the adhesion of overlay or repair concrete to bridge decks and other concrete structures.

Advantages:

1. Reduced materials inventory – only one material is needed, instead of three.
2. Accurate pre-blending of the ingredients of TARGET Cement/Silica Fume Slurry Grout in the required proportions eliminates the variability that inevitably occurs when site batching is used to prepare slurry grouts.

Available In:

• 30 kg (66 lb) paper bags

TARGET® Portland Expanding Grout (9991110) is a non-shrink grout consists of accurately weighed Portland cement, non-metallic aggregate, expanding agents and admixtures. These materials are pre-blended, and require only mixing with water before use. In normal working temperature ranges of 10 °C to 30 °C (50 °F to 86 °F), the grout has a slight expansion prior to final set and is designed for use at dry pack, plastic, flowable or fluid consistencies. It also contains other admixtures to give non-shrink properties after final set has occurred to meet the requirements of ASTM 1107, Grade C, and US Corps of Engineers Specification CRD-C621. The grout contains no chlorides or other admixtures, which could aggravate corrosion of reinforcing steel or prestressing steel cables.

Used for:

• It is designed for use in applications where a non-shrink grout is required, such as the following:
• Grouting under columns, base plates, sole plates and machinery.
• Grouting of prestressed or post-tensioned tendons, anchor bolts, or cables.
• Grouting of post-tensioned structural sections.
• Grout jacking of concrete structures.
• Repairs to concrete structures.
• Void backfilling in tunnel work.
• Underpinning of buildings.
• Permanently anchoring posts, signs, parking meters, railings, columns and other fixtures in concrete, rock or masonry.
• Pile grouting.

Features:

• On request, this product can be manufactured using Type V (Type 50) Portland cement for applications requiring improved sulphate resistance.

Approximate water requirements are:

• Dry Pack= 3.25 to 3.5 L/25 kg bag, or 0.86 to 0.92 US gal/55 lb bag.
• Plastic= 5.13 L/25 kg bag, or 1.36 US gal/55 lb bag.
• Flowable= 5.63 L/25 kg bag, or 1.49 US gal/55 lb bag.
• Fluid= 6.25 L/25 kg bag, or 1.65 US gal/55 lb bag.

Available In:

• 25 kg (55 lb) 56 bags/pallet

QUIKRETE® Portland Expanding Grout (158556) is a non-shrink grout for the following applications.

Used For:

• Grouting under columns, base plates, sole plates and machinery not subjected to heavy impact or dynamic loadings or vibrations. For applications involving such loads consult TARGET Products Ltd.
• Grouting of prestressed or post-tensioned tendons, anchor bolts, or cables.
• Grouting of post-tensioned structural sections.
• Grout jacking of concrete structures.
• Repairs to concrete structures.
• Void backfilling in tunnel work.
• Underpinning of buildings.
• Permanently anchoring posts, signs, parking meters, railings, columns and other fixtures in concrete, rock or masonry.
• Pile grouting.

Features:

• High Strength – up to 8,800 psi (60.5 MPa).
• 3,200 psi (22 MPa) in 24 hours.
• Non-shrink.

Yield/Coverage:

• See Spec Sheet for Table.

Available In:

• 50 lb 56 bags/pallet

TARGET® Machine Base Grout (9991106) is a premium quality non-metallic, non-shrink grout designed for use under severe service conditions. The grout consists of a precisely proportioned blend of Portland cement, stable natural aggregates, supplementary cementing materials including silica fume, expansion agents and special water reducing admixtures. The expansion agents are designed to give shrinkage compensation in both the plastic and hardened states, and include a crystal growth material to compensate for drying shrinkage. The grout is formulated to reduce the amount of mixing water required to give flowable mixes. The grout can be placed at dry-pack, plastic, flowable or fluid consistencies as defined in ASTM Standard C1107.

It is suitable for a wide range of cementitious grouting operations – from the most demanding non-shrink precision grouting to routine work

Used For:

• Pulp and paper machine sole plates.
• Under heavy machinery which transmits high stress to the grout, including milling machines and printing presses.
• Base plates of equipment with dynamic loading.
• Column base plates.
• General machine base grouting.
• General grouting where the grout can be exposed to mild or moderate concentrations of many industrial chemicals. If required, the grout can be supplied with sulphate-resistant cement.
• Most situations where a fluid, sanded grout is needed.
• Any situation where protection of embedded steel against corrosion is required.
• Patching or filling blockouts, and general concrete repairs.
• Installing anchor bolts or tie rods.

Features:

• Can be used at any consistency from dry-pack to flowable.
• Contains no metallic aggregates, making it suitable for service under wet or wet/dry conditions.
• Suitable for voids with least dimensions as small as 6mm (0.25 inch).
• Surface temperatures from below freezing to +150 °C (328 °F) are acceptable after curing as directed.
• Confinement is not essential – may be placed with exposed surfaces.
• Conforms to ASTM C1107 Type C expansion, both before and after initial set.

Yield/Coverage:

• 0.014 m³/bag = 72 bags/m³
• 0.49 ft³/bag = 55 bags/yd³

Available In:

• 25 kg (55 lb) 56 bags/pallet

QUIKRETE® FastSet All-Crete is a fast setting non-shrink structural grout for concrete construction and repair.

Used For:

• Anchor bolts.
• Bearing plates.
• Floor leveling and repair.
• Precast concrete keyways.
• Steel column bases.
• Roads and bridges.
• Filling voids and cracks.

Features:

• Structural concrete repairs from 1/4″ to 24″ deep.
• Sets in 30 minutes.
• Mix to fluid flowable and plastic consistency.
• Up to 8,000 PSI (55.1 MPa) in 28 day.

Yield/Coverage:

• Will vary with water content

Available In:

• 22.7 kg (50 lb) 32 bags/pallet

QUIKRETE® Anchoring Cement (124512) – Rapid setting grout.

Used For:

• Anchoring of posts, rails and bolts in concrete.
• Filling of crack and voids.
• Patching concrete.

Features:

• High strength (2,000 psi in 2 hours).
• Fast setting (10-30 minutes).
• Flowable.

Available In:

• 25 kg (55 lb) 56 bags/pallet