QUIKRETE® Water Resistant Parging Mix (115525) is a Masonry coating and patching of concrete walls for cosmetic.

Used For:

• Concrete block.
• Concrete & masonry walls.
• Base coat for stucco.

Features:

• Easy to apply.
• Strong bond.
• Resists water penetration.
• Can be applied above and below grade.

Yield/Coverage:

• 25 kg (55 lb) bag = 50 ft² @ 1/8″ thick

Available In:

• 25 kg (55 lb) 56 bags/pallet

SPEC MIX® Fiber Base Coat (18009 and Bulk SM18009) is a dry, preblended cement based stucco engineered with proprietary admixtures and fibers that are computer batched for consistency and performance unmatched by traditional field mixed stucco.

Used For:

• Designed for both One Coat and traditional Scratch & Brown Coat systems, it reduces shrinkage and increases long term durability and bond strength of the application.
• When gun or hand applied by a qualified applicator, it is approved by the International Code Council (ICC) as a one-hour fire rated wall when applied as a One Coat application, ESR 3018.

Features:

• It has a custom blended sand gradation that increases the wall flexural strength while reducing cracking and crazing.
• The custom sand gradation also provides excellent workability and finishing properties for the applicator over a traditional field-mixed source.
• Meets CSA A179 requirements.

Yield/Coverage:

• 36 kg – 3/8″ thickness: 20 – 24 ft²
• 36 kg – 1/2″ thickness: 15 – 18 ft²
• 36 kg – 3/4″ thickness: 10 – 12 ft²
• 1,360 kg – 3/8″ thickness: 750 – 900 ft²
• 1,360 kg – 1/2″ thickness: 560 – 675 ft²
• 1,360 kg – 3/4″ thickness: 375 – 450 ft²

Available In:

• 36 kg (80 lb) 42 Bags/pallet
• ~1,360 kg Bulk Bag/pallet

QUIKWALL® Surface Bonding Cement (Gray) (123151) is an alkali resistant, fiberglass reinforced, portland cement based surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Add color with Liquid Cement Color. Surface Bonding Cement is designed for use in the construction of concrete block walls above or below grade that are dry stacked above the first course. It is a versatile product that offers many additional uses and advantages.

Used For:

• Rehabilitating and decorating existing masonry and non-masonry structures.
• Handball/racquetball court construction.
• Decorating and strengthening existing block and mortar walls.
• Waterproofing farm water storage tanks.

Features:

• One-coat application provides both structural strength and textured finish.
• Integral color capability eliminates painting.
• Creates concrete block wall with greater flexural and racking strength than conventional mortar construction.
• Increased productivity and lower in-place cost when using dry- stacked concept.
• Improved fire, water, air and sound control properties.
• Thermal insulation benefits.
• Low maintenance costs.
• Variety of finishes and accent capabilities • No additional waterproofing necessary for water storage containers.
• Damp-proofing of basement walls.

Yield/Coverage:

• Each 50 lb (22.7 kg) bag will cover approximately 50 ft² (4.65 m²) at 1/8″ (3.2 mm) thickness.

Available In:

• 50 lb (22.7 kg) 35 bags/pallet

QUIKRETE® Base Coat Stucco (Pump Grade) (No. 1139-86) is a cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability.

Used For:

• It is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete.

Yield/Coverage:

• Each 36.3 kg (80 lb) bag will yield approximately 0.83 ft³ (23 L) of material.

Available In:

• 36 kg (80 lb) 42 bags/pallet

Hydrated Lime – Type ‘S (9994028) meets ASTM C207.

Used For:

• Mixing with cements and sand to make stucco, mortar and other masonry products.

Features:

• Fine grade.

Available In:

• 23 kg 50 bags/pallet

Hydrated Lime – Type ‘N (9994035) can be used for a wide range of industrial applications due to their controlled sizing and high chemical availability. The high neutralizing value of Hydrated Lime – Type ‘N is useful for acid neutralization applications as well as the treatment of hazardous wastes. Kemidol Hydrate is the Hydrated Lime – Type ‘N product produced by Graymont. This product is available in 50 lb bags, one ton super sacks and bulk.

Used For:

• Addition to Portland Cement for masonry. Plaster and Stucco uses.
• Can also be used for agricultural purposes.

Features:

• All purpose grade.

Available In:

• 22 kg 45 bags/pallet

QUIKRETE® Exterior Stucco Patch (120145) is a white coat to repair broken, cracked or damaged stucco.

Used For:

• Repair broken, cracked or damaged stucco.

Features:

• White in colour.
• Resistant to shrinkage cracks.
• Can be textured and colored to match existing stucco.
• Paintable.

Yield/Coverage:

• 4.5 kg (10 lb) pail yields 5 m², (6 ft²) @ ¼”

Available In:

• 4.5 kg (4 per case)

DRYMIX TECHTURE® 300 Finish Coat Stucco (405388) – is designed and manufactured to be the final coat in a three coat Stucco Application. It was designed for use with DRYMIX Premium Colour Pigments.

Used For:

• It is a thoroughly blended, cement based mixture for use as a final or finishing coat in 3 coat Portland cement plaster.
• for use over properly applied “brown coat”.
• DRYMIX TECHTURE® Bases’ are complete except for measured amounts of clean potable water and desired colour pigment.

Features:

• Provides consistency in quality of mix.
• Provides consistent results with the addition of colour.
• Provides for ease of application with consistent results.
• DRYMIX TECHTURE Bases’ are complete except for measured amounts of clean potable water and desired colour pigment.
• Base 300 (T300) darker grey mixture – do not add any other ingredients.

Yield/Coverage:

• Each 40 kg (88 lb) bag will cover approximately 6.5 – 7.5 m² (70 80 ft²) at 3 mm (⅛ in) thickness.

Available In:

• 40 kg (88 lbs) 40 bags/pallet