Concrete Repair

Trowelable Stamp Mix


Product Photo

TARGET® Trowelable Stamp Mix (9991143) - TARGET® Trowelable Stamp Mix is a next generation single component acrylic modified cement based decorative finish product containing accurately measured and premixed amounts of cement, admixtures, polymers, bonding agents and specially prepared sand. The ratios of the components are controlled to give a product with excellent adhesion properties, rapid strength gain and excellent durability.

Available In:

  • 25 kg (55 lb) 56 bags/pallet
Used For:
  • TARGET Trowelable Stamp Mix is engineered for most decorative concrete finishes and repair work, including the installation of decorative floors, stamp overlays, and fully bonded thin section repairs to concrete slabs, driveways, paths and patios.
Features:
  • Rapid set - about 1½ hours at 18-24°C (65-75°F)
  • Ready for foot traffic in about 3 hours.
  • Adequate working time - about 30 minutes under most conditions
  • Excellent bond to properly prepared surfaces
  • Ease of mixing.
  • Unique multi component acrylic polymer technology that provides excellent bond and tensile strengths even during extended saturation
  • Light color that takes acid stain and dye with brilliant color
  • May be acid stained within 24 hours when using approved products and techniques. NOTE: THIS APPLYS TO AMBIENT CONDITIONS IN EXCESS OF 15C (60F) AND SUBSTRATE TEMPERATURES GREATER THAN 15C (60F).
  • Suitable for indoor or outdoor use.
Yield:
  • For trowel applications, each 25 kg (55 lb) bag of material will give approximately 2.3 m2 at 6mm (25 ft2 at 1/4 inch) thickness. .

More Information: