WALNUT SHELL 

 

Walnut Shell is a blast cleaning media for removal of paint, flash rusting, burrs and other flaws in 
plastic and rubber molding, aluminum and zinc die casting and the electronics industry. It is 
used as a sand replacement for paint removal, graffiti removal and general cleaning in 
restoration of buildings, bridges and outdoor statuary. TARGET Walnut Shell is  
non-sparking and used for aircraft engine clean out and for cleaning steam turbines. 

Available in 12-20 and 20-40.  Many other sizes are available on request. 

Packaging 

Available in 22.68 kg (50 lb) bag, 50 per pallet | 907.20 kg (2000 lb) | 1134 kg (2500 lb) super sacks.  

All oil well grades and custom grades available. 

 

 

CORN COB

 

 

 

Corn Cob is the choice when the job calls for softer, less dusty and an environmentally safe 
abrasive. This blast cleaning media is suitable for metal, wood, fibreglass, plastic, masonry, 
electrical insulators and other sensitve materials  It is non-sparking and safe to use around 
gears and hydraulic rams. Available sizes are 12-20 and 20-40. 

Packaging 

Available in 40 lb bags, 48 per pallet

 

 

 

K2-STRIP 

 

K2-Strip is an odourless, non-sparking, non-volatile, non-flammable and non-controlled 
substance.  It is water soluble. No special disposal considerations are required. 

K2-Strip is between two and three times faster than sodium bicarbonate. K2-Strip will leave a 
slightly increased profile without pitting the metal.  Although not recommended for use on 
fiberglass, plastic, aluminum or other soft substrates, this new media will allow for a significant 
reduction in the time required to remove coating off metals.  

Packaging 

Available in 25 kg (55 lb) bags, 56 bags / pallet 

 

 

SODA BLAST

 

 

Soda blasting uses small sharp crystals of sodium bicarbonate (baking soda) that are propelled, 
by pressurized air or water, at a surface to remove coatings. Sodium bicarbonate is a food grade 
material that is non hazardous, water soluble, and won't damage most surfaces. 

Soda blasting is an environmentally friendlier way of removing paint, dirt, coatings, and other 
surface contaminants that do not cause damage to the surfaces being cleaned. The action of the 
sodium bicarbonate used does not cause heat buildup, sparks, or abrasion to substrate. 

Available in: Industrial Formula (grade 5), Commercial Formula (grade 5L)  

Packaging 

Available in 22.7 kg (50 lb) bags, 50 per pallet 

 

3 | Target Products Ltd. ยท ABRASIVES