TARGET® 30 MPa Concrete Mix (bulk mix only)  is suitable for projects requiring normal setting time with quick strength development after final set has occurred, and where a 30 MPa final strength is required. (@ 28 days)

Used For:

• Commercial Slabs
• Parking Structures
• Deck Supports
• Curbs
• Footings
• Foundations
• Patching Existing Concrete

Features:

• When mixed with water and placed in accordance with directions, Target 30 Mpa results in a concrete with rapid initial strength gain and high final strength.
• May be made with or without air-entrainment to provide superior durability where the concrete will be exposed to cycles of freezing and thawing.
• Approximately 4,300 psi (30.0 MPa) in 28 days.
• Remains workable for up to two hours
• Sets in about five hours at 15 to 20°C (60 to 68°F).

Available In | Yield/Coverage:

• 1680 kg (3700 lb) BB = 1 cu yard
• 1134 kg (2500 lb) BB.

TARGET Fill-Crete (9991511) is a pre-packaged Low strength concrete designed to be used anywhere the use and strength of a conventional Concrete is not required. Can be used for backfill operations where the product may need to be excavatable in the future.

USED FOR:

TARGET Fill-Crete is designed for uses such as the following:

• A cementitious material which is used as a fill or backfill in lieu of compacted-soil backfill. This mixture is capable of filling all voids in irregular excavations and hard to reach places (such as under undercuts of existing slabs)
• Levelling beds with a minimum thickness of 25 mm (1 inch) or more.
• Void filling where a 12 mm (0.472 inch) aggregate is desirable or where the minimum dimension of the pour exceeds 25 mm (1 inch).
• Applications requiring a Low strength concrete at any consistency between plastic and flowable where the quantities involved or placement conditions make the use of conventional ready-mixed concrete impractical.

Features:

• Low strength concrete designed to be used anywhere the use and strength of a conventional Concrete is not required.
• Can be used for backfill operations where the product may need to be excavatable in the future.

Available In:

• 25 kg (55 lb) (56 per pallet)
• 1679 kg (3700 lb) bulk bags

TARGET® Stack and Bank (9991025) is a bagged dry concrete product designed specifically for use in a variety of erosion control and support systems. The product consists of plant-batched, dry-mixed cement, sand, coarse aggregates and admixtures packed in cloth or paper bags. The speed and ease of placement of these bags give an economical system of construction. The dry-mixed concrete in the bags reacts slowly with moisture from pre-wetting and environmental exposure to form a hardened concrete installation. The bags will slowly weather away, leaving an attractive “pillow block” structure.

Used For:

• Headwalls for bridge abutments, vehicle underpasses and drains.
• Ramps, retaining walls and loading docks.
• Small dams for erosion control, reservoirs, irrigation and stock watering.
• Piers for small bridges and docks.
• Cradle supports for tanks and pipes.
• Boat slipways and small sea walls.

Features:

• TARGET® Stack and Bank applications have the advantages over conventional concrete construction of speed of placement and low labor cost, brought about by the elimination of concrete forming, mixing, placing and finishing operations.

Yield/Coverage:

• TARGET® Stack and Bank comes in polywoven 27.22 kg (60 lb) bags with dimensions approximately 100 mm x 330 mm x 560 mm (4″ x 13″ x 22″).

Available In:

• 60 lb 48 bags/pallet

QUIKRETE® Sand & Topping Mix (110326) – Patching or resurfacing damaged concrete where up to 2″ thickness is required.

Used For:

• Driveways, patios, sidewalks etc.
• A base for laying flagstone & pavers.
• Shower base.

Features:

• Consists of cement, fine and coarse sand and admixtures.
• Approximately 4,000 psi (27.6 MPa) in 28 days.
• Just add water.

Available In | Yield/Coverage:

• 25 kg (55 lb) bag/ 56 bags pallet = 5.4 ft² @ 1″ thickness.
• 25 kg (55 lb) bag/ 56 bags pallet = 10.8 ft² @ 1/2″ thickness.

QUIKRETE® Post Haste Concrete Mix (100465) – A fast setting concrete.

Used For:

• Setting posts.
• Signs.
• Footings.
• Other concrete applications.

Features:

• Sets in approximately 15 to 30 minutes.
• Eliminates bracing, construction delay, rain washout and unwanted depression.
• Approximately 2,500 psi (17.2 MPa) in 28 days.

Yield/Coverage:

• 1 Bag = 0.4125 ft³
• 5 Bags = 8.8 ft² @ 3″ thick
• 2 Bags = 1 Post

Available In:

• 25 kg (55 lb) 56 bags/pallet