Concrete Repair

TARGET® Aquaplug

TARGET® Aquaplug (9991181) consists of accurately weighed hydraulic cements, non-metallic aggregate and chemical admixtures. These materials are pre-blended and require only mixing with water before use. TARGET® Aquaplug contains no chlorides or other admixtures which could promote corrosion of reinforcing steel or prestressing steel cables. TARGET® Aquaplug sets within 4 minutes at 20° C (68°F) with little or no plastic shrinkage.

Used For:

  • TARGET® Aquaplug can be used in interior and exterior applications both above and below grade where fast setting is desired. Typical applications include:
    • Stopping active water leaks or seepage at defects or joints in concrete manholes, sewer pipes, tanks, elevator pits, basement walls and concrete or masonry surfaces experiencing water penetration.
    • Patching cracks and holes in concrete and masonry.
    • Anchoring handrail posts or metal fixtures in concrete where high early strength is required.
    • Non-structural repair and anchoring underwater.
    • Temporary grouting of soil- or rock-anchor plates.

Features:

  • TARGET® Aquaplug a fast setting hydraulic cement consisting of accurately weighed hydraulic cements, non-metallic aggregate and chemical admixtures. These materials are preblended and require only mixing with water before use. TARGET® Aquaplug contains no chlorides or other admixtures which could promote corrosion of reinforcing steel or prestressing steel cables. TARGET® Aquaplug sets within 5 minutes at 20 °C (68 °F) with little or no plastic shrinkage.

Yield/Coverage:

  • Approximate Yield 22.6 kg pail – 12.25 L (0.43 ft³).

Available In:

  • 22.6 kg Pail (50 lb) 24 pails/pallet