Stucco & Plastering Products

DRYMIX TECHTURE® 200 Finish Coat Stucco

DRYMIX TECHTURE® 200 Finish Coat Stucco (405387) is designed and manufactured to be the final coat in a three coat Stucco Application. It was designed for use with DRYMIX Premium Colour Pigments™. Manufactured by Target.

Used For:

  • It is a thoroughly blended, cement based mixture for use as a final or finishing coat in 3 coat Portland cement plaster.
  • for use over properly applied “brown coat”.


  • Provides consistency in quality of mix.
  • Provides consistent results with the addition of colour.
  • Provides for ease of application with consistent results.
  • DRYMIX TECHTURE® Bases’ are complete except for measured amounts of clean potable water and desired colour pigment.
  • Base 200 (T200) light grey mixture – do not add any other ingredients.


  • Each 40 kg (88 lb) bag will cover approximately 6.5 – 7.5 m² (70 80 ft²) at 3 mm (⅛ in) thickness.

Available In:

  • 40 kg (88 lbs) 40 bags/pallet