Stucco & Plastering Products
DRYMIX TECHTURE® 300 Finish Coat Stucco
DRYMIX TECHTURE® 300 Finish Coat Stucco (405388) – is designed and manufactured to be the final coat in a three coat Stucco Application. It was designed for use with DRYMIX Premium Colour Pigments™.
- It is a thoroughly blended, cement based mixture for use as a final or finishing coat in 3 coat Portland cement plaster.
- for use over properly applied “brown coat”.
- DRYMIX TECHTURE® Bases’ are complete except for measured amounts of clean potable water and desired colour pigment.
- Provides consistency in quality of mix.
- Provides consistent results with the addition of colour.
- Provides for ease of application with consistent results.
- DRYMIX TECHTURE Bases’ are complete except for measured amounts of clean potable water and desired colour pigment.
- Base 300 (T300) darker grey mixture – do not add any other ingredients.
- Each 40 kg (88 lb) bag will cover approximately 6.5 – 7.5 m² (70 80 ft²) at 3 mm (⅛ in) thickness.
- 40 kg (88 lbs) 40 bags/pallet